Brand: GRP4 FABRICATIONS
Model: GRP5630
M12 x 1.5mm open Wheel Nut. (60 degree taper)...
€2.60
Ex Tax:€2.11
Brand: GRP4 FABRICATIONS
Model: GRP2581
Irish Tarmac spec Casing, with toe and camber kits fitted.
Top quality Atlas axle casing fitting with heavy duty Tubes and Stub axles and loc ringsSupplied with long 4 link diamond brackets, shock brackets and GRP2172 AP 4 pot caliper brackets to suit our brake kit GRP3368 with 290mm discs.56..
€1,576.86
Ex Tax:€1,282.00
Brand: GRP4 FABRICATIONS
Model: GRP2582
Irish Tarmac spec Casing,
Top quality Atlas axle casing fitting with heavy duty Tubes and Stub axles and loc ringsSupplied with long 4 link diamond brackets, shock brackets and GRP2171 AP 4 pot caliper brackets to suit our brake kit GRP3366 with 267mm discs.56 3/4" Wide
GRP4 FABR..
€934.92
Ex Tax:€760.10
-333x222.png "Tractive Atlas HD Grp4 Half Shaft 18t")
-333x222w.png "Tractive Atlas HD Grp4 Half Shaft 18t")
Brand: GRP4 FABRICATIONS
Model: GRP2524
Tractive Atlas HD Grp4 Half Shaft 18tThese shafts are Top Quality Shafts used where an 18T Tractive type Diff spline is required.Overall length 770 mm.18T Diff Spline suitable for GRP2400GTRACTIVE Gripper Diff with Tractive side gears. Will fit the Quaife FF rear flange - GRP2680EN30 ..
€418.20
Ex Tax:€340.00
%20ARP%20Bolt%20M10%20x%201,0%20x%2025mm%20(3)-333x222.png "Tractive CWP Bolt")
%20ARP%20Bolt%20M10%20x%201,0%20x%2025mm%20(2)-333x222w.png "Tractive CWP Bolt")
Model: GRP2392T
TRACTIVE CWP BOLTS TRACTIVE (EACH) ARP Bolt M10 x 1,0 x 25mmTo be used with Tractive Atlas DifferentialAlso compatible with Gripper Differential.Sold per bolt..
€12.55
Ex Tax:€10.20
Brand: GRP4 FABRICATIONS
Model: GRP2470
Atlas ZF Side gears to Suit ZF Atlas Limited Slip Differential.Brand new.18 Teeth.Sold per pair....
€362.85
Ex Tax:€295.00
Brand: GRP4 FABRICATIONS
Model: GRP2480
Atlas ZF Steel End Plate.
High Tensile EN24T Billet machined Steel end plate for ZF LSD...
€214.64
Ex Tax:€174.50
Brand: GRP4 FABRICATIONS
Model: GRP5601
Super lightweight Aluminum Group 4 wheel Nut.Machined from High Tensile Billet 7075 Aluminum and Gold Hard anodized.1/2" unf Thread.1/3 of the weight of the regular GRP4 Steel Nut.Weighs only 20 grams each...
€6.77
Ex Tax:€5.50
Model: GRP2430
Atlas Side Bearing.Sold each...
€42.62
Ex Tax:€34.65
Model: GRP2440
Timken Atlas front Pinion Bearing..
€41.09
Ex Tax:€33.41
-333x222.png "AXLE TOE CORRECTION ALLOY BRACKET SPACER")
Brand: GRP4 FABRICATIONS
Model: GRP2893-2
AXLE TOE CORRECTION ALLOY BRACKET ROSE JOINT SPACERDiameter 18mmBore 12.7mmThickness 3mm..
€2.00
Ex Tax:€1.63
Brand: GRP4 FABRICATIONS
Model: GRP2710
FF Rear wheel Stud.High Tensile Wheel stud to suit Rear Hub on Fully floating Atlas Axle.1/2" UNF Thread.Supplied with High Tensile Bolt.Total length without Bolt 142mm...
€17.63
Ex Tax:€14.33
