Brand: GRP4 FABRICATIONS
Model: GRP3350
Accelerator pedal cable block.
Lightweight billet machined cable block for use with GRP3340 Grp4 Throttle Pedal.
New split design to enable block to be positioned anywhere along accelerator pedal providing the optimum in pedal travel and feel.
"No more heavy on/off type pedal"...
€11.75
Ex Tax:€9.55
Brand: GRP4 FABRICATIONS
Model: GRP4507C
Genuine Aerocatch Bonnet Pin set.Carbon Non locking.Sold per Car set...
€136.33
Ex Tax:€110.84
Brand: GRP4 FABRICATIONS
Model: GRP4360P
Breather Block for Side of Pinto Engine.Designed to take a 19mm ID hose...
€23.39
Ex Tax:€19.02
Brand: GRP4 FABRICATIONS
Model: GRP1080LB/S
Alloy Front Hub
Billet machined from 6082T6 aluminium
(10mm wider that RS2000 hub)
uses Large outer bearing and drilled to suit Standard Studs...
€116.94
Ex Tax:€95.07
-333x222.png "COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINK")
-333x222w.png "COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINK")
Brand: GRP4 FABRICATIONS
Model: GRP1482
COMPRESSION STRUT CONE AND BOLT TO SUIT ANTI ROLL BAR DROPLINKThis Compression Strut cone is used when you wish to connect the anti roll bar drop link to the TCA as in the photo.INCLUDES:1 OFF COMPRESSION STRUT CONE TO SUIT ANTI ROLL BAR DROP LINK1 OFF 3/8 UNF X 2" SOCKET HEAD BOLT
..
€9.23
Ex Tax:€7.50
Brand: GRP4 FABRICATIONS
Model: GRP1480
Cone link assembly to suit our Compression Strut kits.Supplied with 3/8" unf x 1" socket head cap screw.
..
€25.83
Ex Tax:€21.00
-333x222.jpg "Gearbox Tunnel (60g Type)")
Brand: GRP4 FABRICATIONS
Model: GRP5301
Gearbox Tunnel.
Gearbox Tunnel designed to fit new Quaife 60 G gearbox.
used in conjunction with GRP 5360 and GRP5310C.Width at front 375mm.Height at front 410mm.Width at rear 150mm.Height at rear 280mm tapering down to 220mm...
€111.08
Ex Tax:€90.31
Brand: GRP4 FABRICATIONS
Model: GRP4965
Bilstein GRP4 rear shock bottom spacer.
Sold per shock...
€6.77
Ex Tax:€5.50
Brand: GRP4 FABRICATIONS
Model: GRP5580/10
GRP4 Front Wheel Stud plus 10mm.High Tensile Wheel stud to suit front Wheel Hub.Used when using 10 mm Wheel Spacer or when using a Rear Brake Disc conversion kit.1/2" UNF Thread.Supplied with backing Nut.Total length 90mm.
..
€8.82
Ex Tax:€7.17
Brand: GRP4 FABRICATIONS
Model: GRP5580/15
GRP4 Front Wheel Stud plus 15mm.High Tensile Wheel stud to suit front Wheel Hub.Used when using 15 mm Wheel Spacer.1/2" UNF Thread.Supplied with backing Nut.Total length 95mm.
..
€9.84
Ex Tax:€8.00
-333x222.png "M12 DOWTY WASHER")
-333x222w.png "M12 DOWTY WASHER")
Brand: GRP4 FABRICATIONS
Model: GRP4594M12
Dowty Washer / Bonded Seal with 12MM ID.DIMENSIONS:Connection - M12ID - 12mmOD - 18mmThickness 2mm
..
€0.64
Ex Tax:€0.52
Brand: GRP4 FABRICATIONS
Model: GRP4594M14
Dowty Washer / Bonded Seal with 14MM ID.DIMENSIONS:Connection - M14ID - 14mmOD - 22mmThickness 2mm
..
€0.64
Ex Tax:€0.52
